View GL860_4102515.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Genesys Logic, Inc.
GL860
USB 2.0 PC Camera Controller
Datasheet Revision 1.01 Jan. 04, 2006
GL860 USB 2.0 PC Camera Controller
Copyright:
Copyright (c) 2006 Genesys Logic Incorporated. All rights reserved. No part of the materials may be reproduced in any form or by any means without prior written consent of Genesys Logic Inc..
Disclaimer:
ALL MATERIALS ARE PROVIDED "AS IS" WITHOUT EXPRESS OR IMPLIED WARRANTY OF ANY KIND. NO LICENSE OR RIGHT IS GRANTED UNDER ANY PATENT OR TRADEMARK OF GENESYS LOGIC INC.. GENESYS LOGIC HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS IN REGARD TO MATERIALS, INCLUDING ALL WARRANTIES, IMPLIED OR EXPRESS, OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF INTELLECTUAL PROPERTY. IN NO EVENT SHALL GENESYS LOGIC BE LIABLE FOR ANY DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES RESULTING FROM LOSS OF INFORMATION OR PROFITS. PLEASE BE ADVISED THAT THE MATERIALS MAY CONTAIN ERRORS OR OMMISIONS. GENESYS LOGIC MAY MAKE CHANGES TO THE MATERIALS OR TO THE PRODUCTS DESCRIBED THEREIN AT ANY TIME WITHOUT NOTICE.
Trademarks:
is a registrated trademark of Genesys Logic Inc.. All trademarks are the properties of their respective owners.
Office:
Genesys Logic, Inc. 12F, No. 205, Sec. 3, Beishin Rd., Shindian City, Taipei, Taiwan Tel: (886-2) 8913-1888 Fax: (886-2) 6629-6168 http ://www.genesyslogic.com
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
Page 2
GL860 USB 2.0 PC Camera Controller
Revision History
Revision 0.10 0.20 0.30 0.40 0.90 Date 04/29/2004 First draft release 1. Added Pin List and Pin Description in Chapter 3. 05/25/2004 2. Changed Features contents in Chapter 2. 3. Changed CCD/CMOS Sensor interface function description in Chapter 4. 06/25/2004 Changed mass contents. 1. Removed 32-pin QFN package. 07/26/2004 2. Changed 64-pin name. 3. Added 100-pin PQFP package 11/10/2004 First draft release 1. Modify pin list and description. 2. Added and modify sensor register. 09/27/2005 3. Remove pin 64 pin list and pin decription. 4. Remove features "Complies with USB Video Class specification rev. 1.0". 1. Add 48 pin assignment. 01/04/2006 2. Add 48 pin Descriptions 3. Add Application circuit Description
1.00
1.01
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
Page 3
GL860 USB 2.0 PC Camera Controller
TABLE OF CONTENTS CHAPTER 1 CHAPTER 2 CHAPTER 3 GENERAL DESCRIPTION................................................. 6 FEATURES ........................................................................... 7 PIN ASSIGNMENT .............................................................. 8
3.1 PINOUT.................................................................................................... 8 3.2 PIN LIST ................................................................................................ 10 3.3 PIN DESCRIPTIONS ................................................................................ 13 CHAPTER 4 FUNCTIONAL DESCRIPTION ........................................ 15 4.1 FUNCTION BLOCK ................................................................................. 15 4.2 OPERATION MODE ................................................................................ 16 4.2.1 with Flash Memory....................................................................... 16 4.2.2 without Flash Memory ................................................................. 16 CHAPTER 5 ELECTRICAL CHARACTERISTICS.............................. 17 5.1 MAXIMUM RATINGS.............................................................................. 17 5.2 DC CHARACTERISTICS.......................................................................... 17 CHAPTER 6 CHAPTER 7 PACKAGE DIMENSION................................................... 18 ORDERING INFORMATION........................................... 22
APPENDIX A. APPLICATION CIRCUIT ................................................. 23
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
Page 4
GL860 USB 2.0 PC Camera Controller
LIST OF FIGURES
FIGURE 3.1 - 100 PIN QFP PINOUT DIAGRAM..................................................................8 FIGURE 3.2 - 48 PIN LQFP/QFN/LQFN PINOUT DIAGRAM ............................................9 FIGURE 4.1 - BLOCK DIAGRAM ......................................................................................15 FIGURE 6.1 - GL860 100 PIN QFP PACKAGE .................................................................18 FIGURE 6.2 - GL860 48 PIN LQFP PACKAGE ................................................................19 FIGURE 6.3 - GL860 48 PIN QFN PACKAGE...................................................................20 FIGURE 6.4 - GL860 48 PIN LQFN PACKAGE................................................................21
LIST OF TABLES
TABLE 3.1 - 100-PIN QFP PIN LIST................................................................................11 TABLE 3.2 - 48-PIN LQFP/QFN/LQFN PIN LIST ..........................................................12 TABLE 3.3 - 100-PIN QFP PIN DESCRIPTIONS................................................................13 TABLE 3.4 - 48-PIN LQFP/QFN/LQFN PIN DESCRIPTIONS ..........................................14 TABLE 5.1 - MAXIMUM RATINGS ...................................................................................17 TABLE 5.2 - DC CHARACTERISTICS EXCEPT USB SIGNALS...........................................17 TABLE 7.1 - ORDERING INFORMATION...........................................................................22
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
Page 5
GL860 USB 2.0 PC Camera Controller
CHAPTER 1
GENERAL DESCRIPTION
The GL860 is a high performance USB 2.0 controller for PC Camera application. With the Genesys Logic's highly recognized self-developed USB high-speed transceiver, GL860 provides up to 480Mbps bandwidth for fulfilling the mass bandwidth demand of video transferring. GL860 also support USB isochronous mode to provide certain bandwidth to insure user can get satisfied usage experience on video application even running high bandwidth consumption devices concurrently. The GL860 integrates a highly flexible sensor interface to make it easily adopted with variety sensors in which include most popular CCD sensor module and CMOS sensors. The GL860's low power consumption, low operation temperature characteristic also make it is easy to implement a high quality PC Camera without worry about the noise signals of sensors to affect by high performance USB controller.
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
Page 6
GL860 USB 2.0 PC Camera Controller
CHAPTER 2
l
FEATURES
USB specification compliance - Complies with 480Mbps Universal Serial Bus specification rev. 2.0. - Complies with 12Mbps Universal Serial Bus specification rev. 2.0.. - Support USB 2.0 Isochronous Video pipe to 24MB/s. Sensor interface - Programmable interface for popular general CCD module/CMOS sensor Non-processing video streaming (USB High-speed connection) Support 4 USB endpoints - Endpoint 0: Control PIPE. - Endpoint 1: Isochronous/Bulk data in (configurable). - Endpoint 2: Interrupt OUT. - Endpoint 3: Interrupt IN. Embedded 8052 micro-controller - Operate @ 15 MHz clock. - 8K ROM. Support firmware stored in external FLASH memory for development of customer's firmware Support USB remote wakeup. Maximum 15 GPIO ports. 3.3V/1.8V operation. 3.3V to 1.8V regulator is built-in. Capability to support on-line download program Available in 100-pin QFP and 48-pin LQFP/QFN/LQFN package.
l l l
l
l l l l l l l
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
Page 7
GL860 USB 2.0 PC Camera Controller
CHAPTER 3
3.1 Pinout
PIN ASSIGNMENT
P23/FSH_ADR11 P22/FSH_ADR10 P21/FSH_ADR9 P20/FSH_ADR8
FSH_DAT4/ALE
NC NC FSH_DAT7 FSH_DAT6 NC NC FSH_DAT5
NC DVDD33 GND DVDD TEST CMS_CLK
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51
GPIO9 GPIO8 GPIO7 GPIO6 GPIO5 GPIO4 GND X2 X1 DVDD33 NC NC
DVDD GND CMS_DAT2 CMS_DAT3 CMS_DAT4 CMS_DAT5 GPIO10 GPIO11
FSH_DAT0/ICE_CLK FSH_DAT1/ICE_RST
FSH_DAT2/INT0 FSH_DAT3/INT1 P24/FSH_ADR12 P25/FSH_ADR13 P26/FSH_ADR14 P27/FSH_ADR15 VSYNC HSYNC GND DVDD33
81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
GL860
QFP - 100
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31
AVDD33 AVDD33 RREF GND GND DP DM AVDD33 GND GND GND DVDD
P07/FSH_ADR7 P06/FSH_ADR6
NC NC GPIO14 EXTCPU GPIO13 GPIO12
GPIO0 GPIO1 GPIO2 GPIO3
RDB/FSH_OEB WRB/FSHWEB P00/FSH_ADR0 P00/FSH_ADR1
NC CMS_DAT_6 CMS_DAT_7 CMS_DAT_8 CMS_DAT_9
Figure 3.1 - 100 Pin QFP Pinout Diagram
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
P02/FSH_ADR2 P03/FSH_ADR3 P04/FSH_ADR4 P05/FSH_ADR5
NC NC CMS_DAT0 CMS_DAT1 NC NC NC NC GND DVDD NC NC HRST_
Page 8
GL860 USB 2.0 PC Camera Controller
Figure 3.2 - 48 Pin LQFP/QFN/LQFN Pinout Diagram
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
Page 9
GL860 USB 2.0 PC Camera Controller 3.2 Pin List
Three type packages: Case 1 l 100 pin l w/ICE and flash memory l 10 bit sensor interface l 15 GPIO pins l QFP package Case 2 l l l l
48 pin 8 bit sensor interface 12 GPIO pins LQFP/QFN/LQFN package
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
Page 10
GL860 USB 2.0 PC Camera Controller
Table 3.1 - 100-Pin QFP Pin List
Pin# 1 2 3 4 5 6 7 8 9 Pin Name Type Pin# NC CMS_DAT6 CMS_DAT7 CMS_DAT8 CMS_DAT9 FSH_OEB FSH_WEB FSH_ADR0 FSH_ADR1 I I I I I I I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I I Pin Name Type Pin# P P I I/O I/O I I/O I/O I/O P P P P P I/O I/O P P A P P Pin Name Type Pin# P I I/O P I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O Pin Name Type I P P P P P P I I I I I/O I/O I/O I/O I/O I/O
26 GND 27 DVDD 28 NC 29 NC 30 HRST_ 31 GPIO12 32 GPIO13 33 EXTCPU 34 GPIO14 35 NC 36 NC 37 FSH_ADR6 38 FSH_ADR7 39 DVDD 40 GND 41 GND 42 GND 43 AVDD33 44 DM 45 DP 46 GND 47 GND 48 RREF 49 AVDD33 50 AVDD33
51 NC 52 NC 53 DVDD33 54 X1 55 X2 56 GND 57 GPIO4 58 GPIO5 59 GPIO6 60 GPIO7 61 GPIO8 62 GPIO9 63 FSH_DAT4 64 FSH_DAT5 65 NC 66 NC 67 FSH_DAT6 68 FSH_DAT7 69 NC 70 NC 71 FSH_ADR8 72 FSH_ADR9
76 TEST 77 DVDD 78 GND 79 DVDD33 80 NC 81 DVDD 82 GND 83 CMS_DAT2 84 CMS_DAT3 85 CMS_DAT4 86 CMS_DAT5 87 GPIO10 88 GPIO11 89 FSH_DAT0 90 FSH_DAT1 91 FSH_DAT2 92 FSH_DAT3
10 GPIO0 11 GPIO1 12 GPIO2 13 GPIO3 14 FSH_ADR2 15 FSH_ADR3 16 FSH_ADR4 17 FSH_ADR5 18 NC 19 NC 20 CMS_DAT0 21 CMS_DAT1 22 NC 23 NC 24 NC 25 NC
93 FSH_ADR12 I/O 94 FSH_ADR13 I/O 95 FSH_ADR14 I/O 96 FSH_ADR15 I/O 97 VSYNC 98 HSYNC 99 GND I I P P
73 FSH_ADR10 I/O 74 FSH_ADR11 I/O 75 CMS_CLK
I/O 100 DVDD33
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
Page 11
GL860 USB 2.0 PC Camera Controller
Table 3.2 - 48-Pin LQFP/QFN/LQFN Pin List
Pin# 1 2 3 4 5 6 7 8 9 Pin Name Type Pin# DVDD33 CMS_DAT6 CMS_DAT7 CMS_DAT8 CMS_DAT9 GPIO0 GPIO1 GPIO2 GPIO3 P I I I I I/O I/O I/O I/O I/O P P Pin Name Type Pin# I I/O I/O P P P P I/O I/O P A P Pin Name Type Pin# P I I/O P I/O I/O I/O I/O I/O I/O I/O I Pin Name Type P P P P P I I I I I/O I/O P
13 HRST_ 14 GPIO13 15 GPIO14 16 DVDD 17 GND 18 GND 19 AVDD33 20 DM 21 DP 22 GND 23 RREF 24 AVDD33
25 DVDD33 26 X1 27 X2 28 GND 29 GPIO4 30 GPIO5 31 GPIO6 32 GPIO7 33 GPIO8 34 GPIO9 35 CMS_CLK 36 TEST
37 DVDD 38 GND 39 DVDD33 40 DVDD 41 GND 42 CMS_DAT2 43 CMS_DAT3 44 CMS_DAT4 45 CMS_DAT5 46 VSYNC 47 HSYNC 48 GND
10 CMS_DAT1 11 GND 12 DVDD
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
Page 12
GL860 USB 2.0 PC Camera Controller 3.3 Pin Descriptions
Table 3.3 - 100-Pin QFP Pin Descriptions
Pin Name DVDD Pin# Type P I I I I/O I/O (pd) P I (pu) I P I/O I/O A P I I/O I/O I/O I (pd) I/O I/O 1.8V core power Sensor data bit 0~9
Read strobe of Output enable for flash memory. Low active
Description
27,39,77,81 20,21,83~86, CMS_DAT0~9 2~5 FSH_OEB 6 FSH_WEB 7 8,9,14~17, FSH_ADR0~15 37,38,71~74 , 93~96 GPIO0~14 GND HRST_ EXTCPU AVDD33 DM DP RREF DVDD33 X1 X2 FSH_DAT0~7 CMS_CLK TEST VSYNC HSYNC NC
10~13,57~62,
87,88,31,32,34
Write strobe of Write enable for flash memory. Low active Port 0 and Port 2 for Address of flash memory GPIO pins bit 0~14 Ground Hardware reset, low active Use external CPU mode for firmware development. 3.3V analog power USB DUSB D+ Reference R 3.3V power 12M crystal in 12M crystal out Data bus of flash memory Sensor clock Test mode Sensor Vsync Sensor Hsync No connection
26,40,41,42, 46,47,56,78, 82,99 30 33 43,49,50 44 45 48 53,79,100 54 55 89,90,91,92, 63,64,67,68 75 76 97 98
1,18,19,22~25,
28,29,35,36, 51,52,65,66, 69,70,80
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
Page 13
GL860 USB 2.0 PC Camera Controller
Table 3.4 - 48-Pin LQFP/QFN/LQFN Pin Descriptions
Pin Name DVDD
CMS_DAT1~9
GPIO0~9,13,14
Pin# 12,16,37,40
10,42~45,2~5 6~9,29~34, 14,15
Type P I I/O (pd) P P I (pu) P I/O I/O A I I/O I/O I (pd) I/O I/O 1.8V power for crystal Sensor data bit 1~9 GPIO pins bit 0~9,13,14 Ground 3.3V core power
Description
GND DVDD33 HRST AVDD33 DM DP RREF X1 X2 CMS_CLK TEST VSYNC HSYNC NC
11,17,18,22, 28,38,41,48 1,25,39 13 19,24 20 21 23 26 27 35 36 46 47 10
Hardware reset, low active 3.3V analog power USB DUSB D+ Reference R 12M crystal in 12M crystal out Sensor clock Test mode Sensor Vsync Sensor Hsync No connection
Notation: Type O I B B/I B/O P A pu pd odpu
Output Input Bi-directional Bi-directional, default input Bi-directional, default output Power / Ground Analog Internal pull up Internal pull down Open drain with internal pull up
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
Page 14
GL860 USB 2.0 PC Camera Controller
CHAPTER 4
FUNCTIONAL DESCRIPTION
4.1 Function Block
CCD/CMOS
Sensor I/F
TXFIFO
PIE
USB 2.0 PHY
CPU 8052
Figure 4.1 - Block Diagram
l
CCD Module/CMOS Sensor Interface
GL860 can link with popular CMOS sensor on market for PC camera application. GL860 can be configured by different sensor requirement. If sensor is acting as master, GL860 can accept HSYNC/VSYNC from sensor. If GL860 is configured as a master HSYNC/VSYNC will be provided by GL860 to sensor. GL860 keep the most flexibility to fit most of the sensors. The detail of configuration needs to refer to GL860 Application Note. For most sensors no matter of YUV format or RGB format, they can be easily transferred image data to PC by GL860.
l
TXFIFO
GL860 build in 6K byte internal buffer for USB high bandwidth application. This 6K internal buffer can be used as transmitted buffer of isochronous pipe or bulk pipe. In USB specification, the highest bandwidth of isochronous pipe is 24M byte/second, that can be easily derived to maximum frame rate depending on configuration. For example, frame rate can be easily achieved to 30 frames per second if image size is 640 x 480 if raw data output and sensor clock is 15M.
l
PIE
PIE handles the USB protocol defined in chapter 8 of USB specification Revision 2.0. It co-works with CPU to play the role of the chip's kernel. The main functions of PIE include the state machine of USB protocol flow, CRC check, PID error check, and timeout check. Unlike USB1.1, bit stuffing/de-stuffing is implemented in UTMI, not in PIE.
l
USB 2.0 PHY (UTMI )
UTMI handles the low level USB protocol and signaling. It's designed based on the Intel's UTMI specification 1.01. The major functions of UTMI logic are to handle the data and clock recovery, NRZI encoding/decoding, Bit stuffing /de-stuffing, supporting USB2.0 test modes, and serial/parallel conversion.
l
CPU
CPU is the micro-processor unit of GL860. It is an 8-bit 8052 processor with 8K ROM and 256 bytes RAM. It operates at 15Mhz clock to decode the USB command issued from host and then prepares the data to respond to the host. In addition, C can handle GPIO (general purpose I/O) settings and reading content of EEPROM to support high flexibility for customers of different configurations of chip. These configurations include self/bus power mode setting, individual/gang mode setting, downstream port number setting, device removable/non-removable setting, and PID/VID setting.
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
Page 15
GL860 USB 2.0 PC Camera Controller 4.2 Operation Mode
For customized firmware, flash memory can use as external program memory of CPU. This is for customer to develop their firmware. This is only available for 100-pin package type.
4.2.1 with Flash Memory
l l l l Only available in 100-pin QFP package Force EXTCPU = 0 GPIO9 pull down GPIO13/GPIO14 used as serial bus to configure sensor
4.2.2 without Flash Memory
l l l If 100 pin, set EXTCPU = 0 GPIO9 pull down GPIO13/GPIO14 are used as serial bus to configure sensor
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
Page 16
GL860 USB 2.0 PC Camera Controller
CHAPTER 5
ELECTRICAL CHARACTERISTICS
5.1 Maximum Ratings
Table 5.1 - Maximum Ratings
Symbol VIN TA FOSC 3.3V Input Voltage Ambient Temperature under bias Frequency Parameter Min. 3.0 0 Max. 3.6 +100 12 MHz 500ppm Unit V
o
C
5.2 DC Characteristics
Table 5.2 - DC Characteristics Except USB Signals
Symbol PD VDD VIL VIH VTLH VTHL VOL VOH IOLK RDN RUP Power Dissipation Power Supply Voltage LOW level input voltage HIGH level input voltage LOW to HIGH threshold voltage HIGH to LOW threshold voltage LOW level output voltage when IOL=8mA HIGH level output voltage when IOH=8mA Leakage current for pads with internal pull up or pull down resistor Pad internal pull down resister Pad internal pull up resister Parameter Min. 3 2.0 1.36 1.36 2.4 Typ. 3.3 1.48 1.48 Max. 3.6 0.9 1.62 1.62 0.4 Unit mA V V V V V V V A
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
Page 17
GL860 USB 2.0 PC Camera Controller
CHAPTER 6
PACKAGE DIMENSION
D D1 D2 -D102 103 51 50
A A2 0.05 s
A1
-AE E1 E2
Internal No.
GL860 Code AAAAAAAGAA No. YWWXXXXXXXX
Date Code Lot Code
31 30 4X 4X
Green Package
-B-
100 1
aaa C A-B D c
bbb H A-B D SEE DETAIL "F" -C- SEATING PLANE
e
b
ddd M C A-B s D s
01 0
ccc C 02 D
CONTROL DIMENSIONS ARE IN MILLIMETERS. MILLIMETER INCH SYMBOL R1 MIN. NOM. MAX. MIN. NOM. MAX. A 3.40 0.134 R2 A1 0.25 0.010 2.50 2.72 2.90 0.098 0.107 0.114 A2 D 23.20 BASIC 0.913 BASIC GAGE PLANE E 17.20 BASIC 0.677 BASIC S L D1 20.00 BASIC 0.787 BASIC 0.25 mm 03 E1 14.00 BASIC 0.551 BASIC L1 D2 18.85 BASIC 0.742 BASIC E2 12.35 BASIC 0.486 BASIC DETAIL "F" R1 0.13 0.005 R2 0.13 0.30 0.005 0.012 NOTES : 0 0 7 0 7 01 0 0 1. DIMENSIONS D1 AND E1 DO NOT INCLUDE MOLD PROTRUSION. ALLOWABLE PROTRUSION IS 0.25 02 15 REF 15 REF mm PER SIDE. D1 AND E1 ARE MAXIMUM 03 15 REF 15 REF PLASTIC BODY SIZE DIMENSIONS INCLUDING c 0.11 0.15 0.23 0.004 0.006 0.009 MOLD MISMATCH. L 0.73 0.88 1.03 0.029 0.035 0.041 L1 1.60 REF 0.063 REF 2. DIMENSION b DOES NOT INCLUDE DAMBAR S 0.20 0.008 PROTRUSION. ALLOWABLE DAMBAR b 0.22 0.30 0.38 0.009 0.012 0.015 PROTRUSION SHALL NOT CAUSE THE LEAD e 0.65 BASIC 0.026 BASIC WIDTH TO EXCEED THE MAXIMUM b DIMENSION TOLERANCES OF FORM AND POSITION BY MORE THAN 0.08mm. DAMBAR CAN NOT BE aaa 0.25 0.010 LOCATED ON THE LOWER RADIUS OR THE FOOT. bbb 0.20 0.008 MINIMUM SPACE BETWEEN PROTRUSION AND ccc 0.13 0.005 AN ADJACENT LEAD IS 0.07mm. ddd 0.10 0.004
Figure 6.1 - GL860 100 Pin QFP Package
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
D
D
Page 18
GL860 USB 2.0 PC Camera Controller
D D1 D2 D A A2 A1
36 37
25 24
A E1 E2 E
Internal No.
GL860 AAAAAAAGAA YWWXXXXXXXX
Date Code Lot Code
Green Package
B
Code No.
48 1
e b 4X
13 12 4X
bbb H A B D L1 c aaa C A B D
01 0
ddd M C A B s D s
C ccc C
SEATING PLANE
02 R1 H R2
0.25mm
GAGE PLANE
S
L
03 -
NOTES : 1. DIMENSIONS D1 AND E1 DO NOT INCLUDE MOLD PROTRUSION. ALLOWABLE PROTRUSION IS 0.25 mm PER SIDE. D1 AND E1 ARE MAXIMUM PLASTIC BODY SIZE DIMENSIONS INCLUDING MOLD MISMATCH. 2. DIMENSION b DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL NOT CAUSE THE LEAD WIDTH TO EXCEED THE MAXIMUM b DIMENSION BY MORE THAN 0.08mm. DAMBAR CAN NOT BE LOCATED ON THE LOWER RADIUS OR THE FOOT. MINIMUM SPACE BETWEEN PROTRUSION AND AN ADJACENT LEAD IS 0.07mm.
CONTROL DIMENSIONS ARE IN MILLIMETERS. MILLIMETER INCH SYMBOL MIN. NOM. MAX. MIN. NOM. MAX. A 1.60 0.063 A1 0.05 0.15 0.002 0.006 1.35 A2 1.40 1.45 0.053 0.055 0.057 D 9.00 BASIC 0.354 BASIC E 9.00 BASIC 0.354 BASIC D1 7.00 BASIC 0.276 BASIC E1 7.00 BASIC 0.276 BASIC D2 5.50 BASIC 0.217 BASIC E2 5.50 BASIC 0.217 BASIC R1 0.08 0.003 R2 0.08 0.20 0.003 0.008 0 0 3.5 7 0 3.5 7 01 0 0 02 11 12 13 11 12 13 03 11 12 13 11 12 13 c 0.09 0.20 0.004 0.008 L 0.45 0.60 0.75 0.018 0.024 0.030 L1 1.00 REF 0.039 REF S 0.20 0.008 b 0.17 0.20 0.27 0.007 0.008 0.011 e 0.50 BASIC 0.020 BASIC TOLERANCES OF FORM AND POSITION aaa 0.20 0.008 bbb 0.20 0.008 ccc 0.08 0.003 ddd 0.08 0.003
Figure 6.2 - GL860 48 Pin LQFP Package
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
0.05 S
Page 19
GL860 USB 2.0 PC Camera Controller
Figure 6.3 - GL860 48 Pin QFN Package
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
Page 20
GL860 USB 2.0 PC Camera Controller
Figure 6.4 - GL860 48 Pin LQFN Package
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
Page 21
GL860 USB 2.0 PC Camera Controller
CHAPTER 7
ORDERING INFORMATION
Table 7.1 - Ordering Information
Part Number GL860 GL860
Package 100-pin QFP 48-pin LQFP/QFN/LQFN
Status
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
Page 22
GL860 USB 2.0 PC Camera Controller
Appendix A. Application circuit
The schematic below represents a very basic example to the controller and is subject to variations depending on application intentions.
Y1 VDD1_8 TEST CMS_CLK FSH_ADR11 FSH_ADR10 FSH_ADR9 FSH_ADR8 FSH_DAT7 FSH_DAT6 C1 0.1uF VDD3_3 C2 0.1uF FSH_DAT5 FSH_DAT4 GPIO9 GPIO8 GPIO7 GPIO6 GPIO5 GPIO4 VDD3_3 12MHz R1 1M C3 C4 0.1u 20p 20p C5
U1
NC18 DVDD7 DGND6 DVDD6 TEST CMS_CLK P23-FSH_ADR11 P22-FSH_ADR10 P21-FSH_ADR9 P20-FSH_ADR8 NC17 NC16 FSH_DAT7 FSH_DAT6 NC15 NC14 FSH_DAT5 FSH_DAT 4-ALE GPIO9 GPIO8 GPIO7 GPIO6 GPIO5 GPIO4 DGND5 X2 X1 DVDD5 NC13 NC12
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51
VDD3_3 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31
VDD1_8 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
C8 0.1uF
CMS_DAT2 CMS_DAT3 CMS_DAT4 CMS_DAT5 GPIO10 GPIO11 FSH_DAT0 FSH_DAT1 FSH_DAT2 FSH_DAT3 FSH_ADR12 FSH_ADR13 FSH_ADR14 FSH_ADR15 VSY NC HSYNC
VDD3_3 C11 0.1uF
DVDD8 DGND8 CMS_DAT2 CMS_DAT3 CMS_DAT4 CMS_DAT5 GPIO10 GPIO11 FSH_DAT0-ICE_CLK FSH_DAT1-ICE_RST_ FSH_DAT2-INT0_ FSH_DAT3-INT1_ P24-FSH_ADR12 P25-FSH_ADR13 P26-FSH_ADR14 P27-FSH_ADR15 VSYNC HSYNC DGND9 DVDD9
GL860_QFP_100
AVDD4_1 AVDD4 RREF AGND4_1 AGND4 DP DM AVDD3 AGND3 DGND2_1 DGND2 DVDD2 P07-FSH_ADR7 P06-FSH_ADR6 NC11 NC10 GPI O14 EXTCPU GPI O13 GPI O12
C6 R2 720(1%) 0.1u DP DM VDD3_3
C7 0.1u
VDD1_8 FSH_ADR7 FSH_ADR6 GPIO14 EXCPU GPIO13 C9 C10 0.1u 0.1u
NC1 CMS_DAT6 CMS_DAT7 CMS_DAT8 CMS_DAT9 RDB-FSH_OEB W RB-FSH_WEB P00-FSH_ADR0 P01-FSH_ADR1 GPIO0 GPIO1 GPIO2 GPIO3 P02-FSH_ADR2 P03-FSH_ADR3 P04-FSH_ADR4 P05-FSH_ADR5 NC2 NC3 CMS_DAT0 CMS_DAT1 NC4 NC5 NC6 NC7 DGND1 DVDD1 NC8 NC9 HRST_
VDD3_3 GPIO13 R3 4.7K VDD3_3 GPIO14 R4 VDD3_3 R5 20K C12 0.1uF R6 240K 4.7K
CMS_DAT6 CMS_DAT7 CMS_DAT8 CMS_DAT9 FSH_OEB FSH_WEB FSH_ADR0 FSH_ADR1 GPIO0 GPIO1 GPIO2 GPIO3 FSH_ADR2 FSH_ADR3 FSH_ADR4 FSH_ADR5
CMS_DAT1
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 VDD1_8 C13 0.1uF
GL860_QFP100
Page 23
GL860 USB 2.0 PC Camera Controller
VDD1_8 VDD3_3
VDD1_8
C1 0.1uF
C2 0.1uF
C3 0.1uF
U1
VDD3_3 CMS_DAT6 CMS_DAT7 CMS_DAT8 CMS_DAT9 GPIO1 GPIO2 GPIO3 1 2 3 4 5 6 7 8 9 10 11 12 DVDD9 CMS_DAT6 CMS_DAT7 CMS_DAT8 CMS_DAT9 GPIO0 GPIO1 GPIO2 GPIO3 CMS_DAT1 DGND1 DVDD1 TEST CMS_CLK GPIO9 GPIO8 GPIO7 GPIO6 GPIO5 GPIO4 DGND5 X2 X1 DVDD5 36 35 34 33 32 31 30 29 28 27 26 25 CMS_CLK GPIO9 GPIO8 GPIO7 GPIO6 GPIO5 GPIO4 Y1 VDD3_3 12MHz R1 1M C6 HRST_ GPIO13 GPIO14 DVDD2 DGND2 AGND3 AVDD3 DM DP AGND4 RREF AVDD4 0.1uF C7 20p C8 20p
C4 0.1uF
GL860_LQFP/QFN/LQFN_48
VDD1_8
C5 0.1uF
13 14 15 16 17 18 19 20 21 22 23 24
VDD3_3 GPIO13 R2 10K VDD3_3
GL860_LQFP48
DGND9 HSYNC VSYNC CMS_DAT5 CMS_DAT4 CMS_DAT3 CMS_DAT2 DGND8 DVDD8 DVDD7 DGND6 DVDD6
48 47 46 45 44 43 42 41 40 39 38 37
HSYNC VSYNC CMS_DAT5 CMS_DAT4 CMS_DAT3 CMS_DAT2
VDD3_3
R3 GPIO14 R4 10K C10
20K 0.1uF
GPIO13 GPIO14
VDD3_3
C9 DM DP R5 720R (1%) 0.1uF
VDD1_8 R6 240K C11 0.1uF
VDD3_3
C12 0.1uF
(c)2000-2006 Genesys Logic Inc. - All rights reserved.
Page 24

▲Up To Search▲

Price & Availability of GL860

	To Download GL860 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .